IDES Prospector Already have an account? Login Here

IDES

HAIPLEN H90 C6

Polypropylene Homopolymer

Calcium Carbonate Filler, 30%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for HAIPLEN H90 C6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Calcium Carbonate Filler, 30% Filler by Weight
Additive 
  • Antistatic
  • Heat Stabilizer
  • UV Stabilizer
Features 
  • Antistatic
  • Good Surface Finish
  • Heat Stabilized
  • High Flow
  • Homopolymer
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648, ISO 75-2/B
264 psi, Unannealed
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ASTM D1525 2, ISO 306/A50 2
--
°F
 ASTM D1525 3, ISO 306/B50 3
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Oxygen Index
%
 ASTM D2863
Additional Information
Granule Humidity, TARO 002: 0.05%
Notched Izod Impact Strength , ISO 180, 23°C: 30 J/m
CTI IEC 112, IEC 60112, Method A: >600 V
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN H90 C6, HAIPLEN , HAIPLENH90C6, H 90 C 6, H90 C6, H90, 90C, C6, H90C6, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Taro Plast, PolypropyleneHomopolymer, PPHomopolymer, 90H
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Surface Finish, High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h), Loading 1 (10 N)
3Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.