TAROLON 3000 Y0 Taro Plast Polycarbonate

Product Description

Polycarbonate self extinguishing UL 94 V0 halogen free.

Available: all colors transparent, release agent (W), heat stabilized (H), UV-stabilized (L)

General

Material Status

Commercial: Active

Availability

Europe

Additive

Heat Stabilizer

Mold Release

UV Stabilizer

Features

Good Mold Release

Good UV Resistance

Halogen Free

Heat Stabilized

Self Extinguishing

Appearance

Clear/Transparent

Colors Available

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage			ASTM D955
Flow		in/in
Across Flow		in/in
Water Absorption
73°F, 24 hr		%	ASTM D570, ISO 62
Saturation		%	ASTM D570
Saturation, 73°F		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength² (73°F)		ft·lb/in²	ASTM D256, ISO 179
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ISO 180, ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/A50, ASTM D1525³
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAROLON 3000 Y0, TAROLON , TAROLON3000Y0, 3000 Y 0, 3000 Y0, 3000Y, Y0, 3000Y0, Polycarbonate, PC, Taro Plast, Y3000
Features
Features may also be described by the following terms: Self Extinguishing, Self-Extinguishing, Zero Halogen Content, Halogen Free, Good Mold Release, Easy Release, Good Demolding, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.

Injection	Nominal Value	Unit
Drying Temperature
--		°F
Pre-heater		°F
Drying Time
--		hr
Pre-heater		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²6x4x50 mm

³Rate A (50°C/h), Loading 1 (10 N)

TAROLON 3000 Y0

Polycarbonate

Supplied by Taro Plast S.p.A.