IDES Prospector Already have an account? Login Here

IDES

SCLAIR® 94E

Linear Medium Density Polyethylene

Supplied by NOVA Chemicals

The technical datasheet with complete property values for SCLAIR® 94E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antioxidant
  • Processing Aid
  
Features 
  • Antioxidant
  • Food Contact Acceptable
  • Good Processability
  • Good Stiffness
  • Good Strength
  • Good Stretchability
Uses 
  • Blending
  • Film
  • Netting
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Dart Drop Impact (0.98 mil, Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 0.98 mil, Blown Film
g
  
TD: 0.98 mil, Blown Film
g
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 DSC
Additional Information
Nominal Value
Unit
Test Method
Low Friction Puncture
ft·lb/in
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCLAIR® 94E, SCLAIR 94E, SCLAIR® , SCLAIR, SCLAIR94E, 94 E, 94E, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, Nova Chemicals, PolyethyleneLinearMediumDensity, E94
Features
Features may also be described by the following terms: Good Stretchability, Good Strength, Good Stiffness, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.