IDES Prospector Already have an account? Login Here

IDES

AD majoris DT 267

Polypropylene

Mineral Filler, 20%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris DT 267 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DT 267 is a 20% mineral filled polypropylene compound intended for injection molding. The product is available in natural DT 267 but other colors can be provided on request.

DT 267 has been developed espeacially for automotive interior parts that require excellent balance between the impact strength and stiffness and very good surface quality. In addition it has a good UV and weathering stability.

Applications:
  • Bumper reinforcement parts
  • Consoles
  • Cowl vent grilles
  • Door panels and pockets
  • Handles
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 20% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Good Surface Finish
  • Good UV Resistance
  • Good Weather Resistance
  • High Impact Resistance
  • High Stiffness
  • High Strength
Uses 
  • Automotive Bumper
  • Automotive Interior Parts
  • Handles
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Flexural Modulus 2 (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength (73°F, Injection Molded)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris DT 267, AD majoris , ADmajorisDT267, ADmajoris, majorisDT 267, majoris, majorisDT267, DT 267, DT267, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 267DT, 267majorisDT
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Impact Resistance, High Strength, High Stiffness, Good Surface Finish, Good Weather Resistance, Weather Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on-pressure: 50 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.