IDES Prospector Already have an account? Login Here

IDES

AD majoris BW 300 BLACK 8229

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris BW 300 BLACK 8229 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BW 300 BLACK 8229 is a 30% glass-filled polypropylene compound intended for injection molding.

The product is available in both black (BW 300-8229) and natural (BW 300) but other colors can be provided on request.

BW 300 BLACK 8229 has been developed especially for the automotive applications and electrical components.

The good flowability of BW 300 BLACK 8229 makes it very easy to process even for complicated parts with long flow paths and it offers very high productivity with short cycle times. BW 300 BLACK 8229 is formulated to give an excellent surface finish with good scuff resistance.

Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from BW 300 BLACK 8229.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Fast Molding Cycle
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Good Surface Finish
  • Low Shrinkage
  • Medium Rigidity
  • Scratch Resistant
Uses 
  • Automotive Applications
  • Electrical Parts
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Break, Injection Molded)
%
 ISO 527-2
Flexural Modulus 2 (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris BW 300 BLACK 8229, AD majoris , ADmajorisBW300BLACK8229, ADmajoris, majorisBW 300 BLACK 8229, majorisBW300, majoris, majorisBW300BLACK8229, BW 300 BLACK 8229, BW300, 300BLACK, BLACK8229, BW300BLACK8229, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 300BW, 300majorisBW
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Flow, Good Processability, Easy Processing, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Surface Finish, Scratch Resistant, Resists Scratches, Medium Rigidity, Good Rigidity, Low Shrinkage, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on-pressure: 50 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.