AD majoris EB 710 AD majoris Polypropylene, Unspecified (Mineral Filler, 70%)

Product Description

EB 710 is a natural, 70% mineral filled polypropylene compound intended for injection molding.

The product is available in natural (EB 710) and black (EB 710-8229) but other colors can be supplied on request.

EB 710 has been developed for applications where high density, good surface finish and good flow properties are necessary.

Applications
High density products such as:

Sound absoption parts

Electronic housings

Cosmetic moldings

Appliances

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Mineral Filler, 70% Filler by Weight

Features

Good Flow

Good Surface Finish

High Density

Noise Damping

Uses

Appliances

Cosmetics

Electrical Housing

Insulation

Appearance

Black

Colors Available

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage - Flow (73°F, 0.0787 in)		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, Injection Molded)		psi	ISO 527-2/5
Tensile Strain (Break, Injection Molded)		%	ISO 527-2/5
Flexural Modulus² (Injection Molded)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris EB 710, AD majoris , ADmajorisEB710, ADmajoris, majorisEB 710, majoris, majorisEB710, EB 710, EB710, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 710EB, 710majorisEB
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Surface Finish, Good Flow.
Uses
Uses may also be described by the following terms: Electrical Housings, Electrical Housing.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Hold-on-pressure: 50 to 70% of the injection pressure

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

AD majoris EB 710

Polypropylene

Mineral Filler, 70%

Supplied by AD majoris