IDES Prospector Already have an account? Login Here

IDES

Moplen EP200R

Thermoplastic Polyurethane Elastomer

Supplied by PolyMirae

The technical datasheet with complete property values for Moplen EP200R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Moplen EP200R is the reactor TPO manufactured by PMC under the license of BASELL using the Spheripol process.

Moplen EP200R is a super impact copolymer particularly suitable for injection molding of high impact resistance required application and compounding base resin of automotive bumper fascia and containers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • High Impact Resistance
  • Impact Copolymer
  • Low Temperature Impact Resistance
  
Uses 
  • Automotive Bumper
  • Containers
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-4°F, Injection Molded
ft·lb/in
  
73°F, Injection Molded
 
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Durometer Hardness (Shore D, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (Injection Molded)
 
 ASTM D2457
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Moplen EP200R, Moplen , MoplenEP200R, EP 200 R, EP200R, EP200, 200R, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, PolyMirae, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 200EP
Features
Features may also be described by the following terms: High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Processability, Easy Processing, Impact Copolymer.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.