EVAL SP292A Eval Ethylene Vinyl Alcohol

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
210°C/2.16 kg		g/10 min
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature (DSC)		°F	DSC
Melting Temperature (DSC)		°F	ISO 3146
Peak Crystallization Temperature (DSC)		°F	ISO 3146
Additional Information
Limit of Orientability, Simultaneous, Kuraray Method: 4.5 x 4.5 Limit of Orientability, Sequential, Kuraray Method: 4 x 4 O2 Transmission Rate, ISO 14663-2, 65%RH, 20°C: 0.112 cm²-mil/100in²/day/atm O2 Transmission Rate, ISO 14663-2, 85%RH, 20°C: 0.295 cm²-mil/100in²/day/atm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EVAL® SP292A, EVAL SP292A, EVAL® , EVAL, EVALSP292A, SP 292 A, SP292A, SP292, 292A, Ethylene Vinyl Alcohol, EVOH, Vinyl Alcohol, VOH, EthyleneVinylAlcohol, VinylAlcohol, 292SP

Extrusion Notes
The recommended design for metering screws: L/D Ratio: 24 to 30 Compression Ratio: 2.6 to 3.6 Zone Distribution: Feed: 8 to 10 D Compression: 8 to 10 D Metering: 8 to 10 D The recommended design for barrier screws: L/D Ratio: 24 to 30 Compression Ratio: 2.5 to 3 Zone Distribution: Feed: 6 to 7.5 D (25% of screw length) Transition and Melting: 12 to 15 D (50% of screw length) Metering: 6 to 7.5 D (25% of screw length)

EVAL® SP292A