IDES Prospector Already have an account? Login Here

IDES

EVAL® SP292B

Ethylene Vinyl Alcohol

Supplied by Eval Company of America

The technical datasheet with complete property values for EVAL® SP292B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Lubricant
Features 
  • Copolymer
  • Lubricated
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
210°C/2.16 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DSC
Melting Temperature (DSC)
°F
 ISO 3146
Peak Crystallization Temperature (DSC)
°F
 ISO 3146
Additional Information
Limit of Orientability, Simultaneous, Kuraray Method: 4.5 x 4.5
Limit of Orientability, Sequential, Kuraray Method: 4 x 4
O2 Transmission Rate, ISO 14663-2, 65%RH, 20°C: 0.112 cm²-mil/100in²/day/atm
O2 Transmission Rate, ISO 14663-2, 85%RH, 20°C: 0.295 cm²-mil/100in²/day/atm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EVAL® SP292B, EVAL SP292B, EVAL® , EVAL, EVALSP292B, SP 292 B, SP292B, SP292, 292B, Ethylene Vinyl Alcohol, EVOH, Vinyl Alcohol, VOH, EthyleneVinylAlcohol, VinylAlcohol, 292SP
Extrusion Notes
The recommended design for metering screws:
L/D Ratio: 24 to 30
Compression Ratio: 2.6 to 3.6
Zone Distribution:
  • Feed: 8 to 10 D
  • Compression: 8 to 10 D
  • Metering: 8 to 10 D
The recommended design for barrier screws:
L/D Ratio: 24 to 30
Compression Ratio: 2.5 to 3
Zone Distribution:
  • Feed: 6 to 7.5 D (25% of screw length)
  • Transition and Melting: 12 to 15 D (50% of screw length)
  • Metering: 6 to 7.5 D (25% of screw length)
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.