P-BLEND X5 Putsch Kunststoffe Acrylonitrile Butadiene Styrene + PC

Product Description

Polymerblend of PC/ABS. In comparison to ABS higher impact strength and heat resistance.

General

Material Status

Availability

Features

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength (3.5% Strain)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180
-4°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Additional Information
Tensile Strength, ISO 527: 46 MPa
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: P-BLEND X5, PBLEND X5, P-BLEND , PBLEND, P:BLEND, P/BLEND, P+BLEND, P_BLEND, P BLEND, PBLENDX5, X 5, X5, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Putsch Kunststoffe, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 5X
Features
Features may also be described by the following terms: High Heat Resistance, Good Impact Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

P-BLEND X5