IDES Prospector Already have an account? Login Here

IDES

Ultramid® 8272G HS BK-102

Polyamide 6

Glass Fiber Reinforcement, 12%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® 8272G HS BK-102 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, PA6 blow molding compound offering an excellent balance of engineering properties combined with the melt strength ideally suited for blow molding and other applications requiring ultra high melt viscosity. It exhibits improved strength, stiffness and creep resistance compare to standard blow molding grades. Outstanding permeability and chemical resistance to oils, hydrocarbons and most solvents are other advantages along with excellent stiffness and the ability to fabricate complex shapes for cost effective metal replacements.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 12% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Melt Strength
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • Good Thermal Aging Resistance
  • Good Thermal Stability
  • Heat Stabilized
  • High Strength
  • Hydrocarbon Resistant
  • Oil Resistant
  • Semi Crystalline
  • Solvent Resistant
  • Very high Viscosity
Uses 
  • Automotive Applications
  • Charge Air Systems
  • Packaging
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Injection Molding
  
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
        
--
--
 
 ASTM D792
--
--
lb/in³
 ISO 1183 2
Molding Shrinkage - Flow (0.125 in)
--
in/in
 ASTM D955
Water Absorption
        
24 hr
--
%
 ASTM D570
73°F, 24 hr
--
%
 ISO 62
Saturation
--
%
 ASTM D570, ISO 62 2
Equilibrium, 50% RH
--
%
 ASTM D570
Equilibrium
--
%
 ISO 62 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
        
-40°F
psi
 ISO 527-2
176°F
psi
 ISO 527-2
250°F
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Strength
        
Break, -40°F
psi
 ASTM D638, ISO 527-2
Break, 73°F
psi
 ASTM D638
Break, 250°F
psi
 ASTM D638, ISO 527-2
Break
psi
 ISO 527-2 2
Tensile Elongation
        
Break, -40°F
%
 ASTM D638
Break, 73°F
--
%
 ASTM D638
Break, 250°F
%
 ASTM D638
Break
--
%
 ISO 527-2 2
Flexural Modulus
        
-40°F
psi
 ASTM D790
73°F
psi
 ASTM D790
250°F
--
psi
 ASTM D790
73°F
--
psi
 ISO 178
Flexural Strength
       ASTM D790
-40°F
psi
  
73°F
psi
  
250°F
--
psi
  
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength (73°F)
--
ft·lb/in²
 ISO 179/1eA 2
Notched Izod Impact
        
-40°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
73°F
--
ft·lb/in²
 ISO 180
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (R-Scale)
--
 
 ASTM D785
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
        
66 psi
--
°F
 ISO 75-2 2
264 psi, Unannealed
--
°F
 ASTM D648
264 psi
--
°F
 ISO 75-2 2
Peak Melting Temperature
--
°F
 ASTM D3418, ISO 3146
CLTE
        
Flow
--
in/in/°F
 ASTM E831
Flow
--
in/in/°F
 ISO 11359-2
Transverse
--
in/in/°F
 ISO 11359-2
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
        
0.0591 in
--
ohm·cm
 ASTM D257
--
--
ohm·in
 IEC 60093 2
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 8272G HS BK-102, Ultramid 8272G HS BK102, Ultramid® , Ultramid, Ultramid8272GHSBK102, 8272 G HS BK, 8272G HS BK, 8272 G HS BK 102, 8272GHSBK, 8272G HS BK-102, 8272G HS BK102, 8272G HS BK:102, 8272G HS BK/102, 8272G HS BK+102, 8272G HS BK_102, 8272G HS BK 102, 8272G, GHS, HSBK, BK102, 8272GHSBK102, 8272GHSBK_102, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G8272
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Features
Dry
Features may also be described by the following terms: Very High Viscosity, Good Processability, Easy Processing, Good Chemical Resistance, Chemical Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Thermal Stability, Good Surface Finish, High Strength, Good Stiffness, Good Creep Resistance, Creep Resistant, Good Melt Strength, Good Abrasion Resistance, Abrasion Resistant, Semi-Crystalline, Good Dimensional Stability, Dimensionally Stable, Good Thermal Aging Resistance, Thermal Aging Resistant.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
Dry
This plastic material has approval for 6 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ASTM (3), DELPHI (1), CHRYSLER (1), GM (1).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 8272G HS BK-102, Ultramid 8272G HS BK102, Ultramid® , Ultramid, Ultramid8272GHSBK102, 8272 G HS BK, 8272G HS BK, 8272 G HS BK 102, 8272GHSBK, 8272G HS BK-102, 8272G HS BK102, 8272G HS BK:102, 8272G HS BK/102, 8272G HS BK+102, 8272G HS BK_102, 8272G HS BK 102, 8272G, GHS, HSBK, BK102, 8272GHSBK102, 8272GHSBK_102, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G8272
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.