IDES Prospector Already have an account? Login Here

IDES

FRAGOM G/459 20

Polyolefin

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for FRAGOM G/459 20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine compounds.
FRAGOM G/459 20 is a flame retardant crosslinkable compound having good temperature index and oxygen index, suitable for cable sheathing and insulation. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/202 or MAC/100 SCU (more active in reaction)
REACTION BETWEEN GRAFTING AND CATALYST
These two compounds, separately stored, must be mixed before starting extrusion in the ratio:
GRAFTING/CATALYST 95/5
We suggest to use the compound to produce cables with size not more than 10 mm2.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Crosslinkable
  • Flame Retardant
  • Halogen Free
Uses 
  • Cable Jacketing
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
IEC 60811
Tensile Strain (Break)
%
IEC 60811
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Hot Set 2     IEC 60811
392°F
%
 
Residual Value: 392°F
%
 
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (275°F, 168 hr)
%
IEC 60811
Change in Tensile Strain at Break in Air (275°F, 168 hr)
%
IEC 60811
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
BS 6622
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
ASTM D2863
Halogen Content
%
IEC 60754-1
Temperature Index (Burning) 3
 
NES 715
Additional Information
Nominal Value
Unit
Test Method
Operating Temperature - EI5
°F
BS 7655
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FRAGOM G/459 20, FRAGOM G459 20, FRAGOM , FRAGOMG45920, G/459 20, G459 20, G:459 20, G+459 20, G-459 20, G_459 20, G 459 20, G459, 45920, G45920, G_45920, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Crosspolimeri, PolyolefinUnspecified, 459G
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): BS (2), IEC (1), VDE (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
220 N/cm²
321% O2
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.