IDES Prospector Already have an account? Login Here

IDES

FRAGOM G/470

Polyolefin

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for FRAGOM G/470 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine compounds.
FRAGOM G/470 is a flame retardant crosslinkable compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation.
It is a conveniently grafted compound able to react in presence of moisture and of a catalyst. We normally suggest our catalyst type MAC/202.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Crosslinkable
  • Flame Retardant
  • Halogen Free
Uses 
  • Cable Jacketing
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Additional Information
Reaction between grafting and catalyst, must be mixed before starting extrusion in the ratio, Grafting/Catalyst: 95/5
Temperature Index, 21% O2: >280°C
HCI Generation: <=0.5%
Moisture Absorption, Gravimetric: <0.5 mg/cm²
Melt Flow Rate, ASTM D1238, 190°C/21.6 kg: 3 to 6 g/10min
Hot Set Test, reading after 15, IEC 540, 20 N/cm² at 200°C: 30%
Hot Set Test, residual value, IEC 540, 20 N/cm² at 200°C: 0%
Reaction between grafting and catalyst, must be mixed before starting extrusion in the ratio, Grafting/Catalyst: 95/50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FRAGOM G/470, FRAGOM G470, FRAGOM , FRAGOMG470, G/470, G470, G:470, G+470, G-470, G_470, G 470, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Crosspolimeri, PolyolefinUnspecified, 470G
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.