IDES Prospector Already have an account? Login Here

IDES

FRAGOM PR/410-S

Polyolefin

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for FRAGOM PR/410-S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds.
FRAGOM PR/410-S is a flame retardant polyolefine thermo-plastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation.
Quality M1 CEI 2022 III PR/410-S is suitable for VDE 0207 HM2 and BS 7655 LTS1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Flame Retardant
  • Halogen Free
  
Uses 
  • Cable Jacketing
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus (68°F)
psi
 ISO 178
Elastomers
Nominal Value
Unit
Test Method
Compression Set (176°F, 6.00 hr)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (230°F, 168 hr)
%
 ISO 188
Change in Tensile Strain at Break in Air (230°F, 168 hr)
%
 ISO 188
Change in Tensile Stress (158°F, 4 hr, in SAE 20 Oil)
%
 ISO 1817
Change in Tensile Strain at Break (158°F, 4 hr, in SAE 20 Oil)
%
 ISO 1817
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Additional Information
Temperature Index, 21% O2: 280°C
HCI Generation: 0%
Corrosivity: >4.5 PH
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FRAGOM PR/410-S, FRAGOM PR410S, FRAGOM , FRAGOMPR410S, PR, PR 410 S, PR/410-S, PR410S, PR:410-S, PR+410-S, PR-410-S, PR_410-S, PR 410-S, PR/410:S, PR/410/S, PR/410+S, PR/410_S, PR/410 S, PR410, 410S, PR_410S, PR 410S, PR410_S, PR410 S, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Crosspolimeri, PolyolefinUnspecified, 410PR
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.