IDES Prospector Already have an account? Login Here

IDES

FRAGOM XLC/125

Polyolefin

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for FRAGOM XLC/125 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine compounds.
FRAGOM XLC/125 is a crosslinkable compound peroxide system, halogen free flame retardant. It is suitable for automotive cable insulation.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Crosslinkable
  • Flame Retardant
  • Halogen Free
Uses 
  • Automotive Applications
  • Cable Jacketing
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Additional Information
HCI Generation: 0%
Corrosivity: >4.5 PH
Melt Flow Rate, ASTM D1238, 190°C/21.6 kg: 1.5 to 2.5 g/10min
Hot Set Test, reading after 15, IEC 540, 20 N/cm² at 200°C: 15%
Hot Set Test, residual value, IEC 540, 20 N/cm² at 200°C: -10%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FRAGOM XLC/125, FRAGOM XLC125, FRAGOM , FRAGOMXLC125, XLC, XLC/125, XLC125, XLC:125, XLC+125, XLC-125, XLC_125, XLC 125, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Crosspolimeri, PolyolefinUnspecified, 125XLC
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.