GETILAN ATP/130-XH3A Crosspolimeri Polyethylene, Crosslinked

Product Description

GETILAN is the trade-mark of our crosslinkable polythene.
GETILAN ATP/130-XH3A GRAFTING is a high density antiflame chemically crosslinkable polythene with high temperature index and low HCl content. Suitable for insulation and sheathing.
It is a conveniently grafted polythene able to react in presence of moisture and of catalyst.
We normally suggest our catalyst type MAC/203-H.

REACTION BETWEEN GRAFTING AND CATALYST:
These two polythene, separately stored, must be mixed before starting extrusion in the ratio:
GRAFTING/CATALYST=92,5/7,5

Suitable for extrusion of automobile cables type T3S

General

Material Status

Commercial: Active

Availability

Europe

Features

Crosslinkable

Uses

Cable Jacketing

Fiber Optic Cable

Forms

Pellets

Processing Method

Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (311°F, 336 hr)		%	ISO 188
Change in Tensile Strain at Break in Air (311°F, 336 hr)		%	ISO 188
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Oxygen Index		%	ASTM D2863
Additional Information
HCI Generation: <4% Durometer Hardness, ASTM D2240, shore D, 20°C: 60 Hot Set Test, reading after 15, IEC 540, 20 N/cm² at 200°C: 30% Hot Set Test, residual value, IEC 540, 20 N/cm² at 200°C: 0% Crosslinking of the finished product is obtained by: Immersion of the bobbin in hot water at 85/90°C for two hours up to 3 mm thickness Steam treatment at 0.15 bar for 5/6 hours
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GETILAN ATP/130-XH3A, GETILAN ATP130XH3A, GETILAN , GETILANATP130XH3A, ATP, ATP 130 XH 3 A, ATP/130-XH3A, ATP130XH3A, ATP:130-XH3A, ATP+130-XH3A, ATP-130-XH3A, ATP_130-XH3A, ATP 130-XH3A, ATP/130:XH3A, ATP/130/XH3A, ATP/130+XH3A, ATP/130_XH3A, ATP/130 XH3A, ATP130, 130XH, XH3, 3A, ATP_130XH3A, ATP 130XH3A, ATP130_XH3A, ATP130 XH3A, Polyethylene, Crosslinked, Polyethylene Crosslinked, XLPE, Polyethylene, PE, Crosspolimeri, PolyethyleneCrosslinked, 130ATP
Uses
Uses may also be described by the following terms: Fiber Optic Cable, Fiber Optics.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Die Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

GETILAN ATP/130-XH3A

Crosslinked Polyethylene

Supplied by Crosspolimeri S.p.A.