Reaction between grafting and catalyst, must be mixed before starting extrusion in the ratio, Grafting/Catalyst: 92.7/7.5 Flammability Test, IEC 332: pass HCI Generation: <=3% Hot Set Test, reading after 15, IEC 540, 20 N/cm² at 200°C: 40% Hot Set Test, residual value, IEC 540, 20 N/cm² at 200°C: -5% Crosslinking of the finished product is obtained by:
- Immersion of the bobbin in hot water at 85/90°C for two hours up to 3 mm thickness
- Steam treatment at 0.15 bar for 5/6 hours
Reaction between grafting and catalyst, must be mixed before starting extrusion in the ratio, Grafting/Catalyst: 92.7/7.50 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: GETILAN ATP/190-X1AA, GETILAN ATP190X1AA, GETILAN , GETILANATP190X1AA, ATP, ATP 190 X 1 AA, ATP/190-X1AA, ATP190X1AA, ATP:190-X1AA, ATP+190-X1AA, ATP-190-X1AA, ATP_190-X1AA, ATP 190-X1AA, ATP/190:X1AA, ATP/190/X1AA, ATP/190+X1AA, ATP/190_X1AA, ATP/190 X1AA, ATP190, 190X, X1, 1AA, ATP_190X1AA, ATP 190X1AA, ATP190_X1AA, ATP190 X1AA, Polyethylene, Crosslinked, Polyethylene Crosslinked, XLPE, Polyethylene, PE, Crosspolimeri, PolyethyleneCrosslinked, 190ATP
|