IDES Prospector Already have an account? Login Here

IDES

CROSSVINIL K/100-PLA

Polyvinyl Chloride

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for CROSSVINIL K/100-PLA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CROSSVINIL K/100-PLA is a compound having different self-extinguishing charcteristics, excellent flame retardant properties, low toxicity, less odour and HCl emission. Satisfying code rules CEI 20-22 and CEI 2037.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Flame Retardant
Uses 
  • Cable Jacketing
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Elastomers
Nominal Value
Unit
Test Method
Compression Set (248°F, 1.00 hr)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (212°F, 168 hr)
%
 ISO 188
Change in Tensile Strain at Break in Air (212°F, 168 hr)
%
 ISO 188
Change in Tensile Stress
     ISO 1817
77°F, 4 hr, in Gasoline
%
  
158°F, 4 hr, in SAE 20 Oil
%
  
Change in Tensile Strain at Break
     ISO 1817
77°F, 4 hr, in Gasoline
%
  
158°F, 4 hr, in SAE 20 Oil
%
  
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Additional Information
HCI Generation: >=10%
Moisture Absorption, Gravimetric: >=0.13 mg/cm²
Cold Percussion, -15°C: pass
Cold Bend Test, BS2782, -25°C: pass
Cold Bend Test After Aging, -15°C: pass
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CROSSVINIL K/100-PLA, CROSSVINIL K100PLA, CROSSVINIL , CROSSVINILK100PLA, K 100 PLA, K/100-PLA, K100PLA, K:100-PLA, K+100-PLA, K-100-PLA, K_100-PLA, K 100-PLA, K/100:PLA, K/100/PLA, K/100+PLA, K/100_PLA, K/100 PLA, K100, 100PLA, K_100PLA, K 100PLA, K100_PLA, K100 PLA, Polyvinyl Chloride, Unspecified, Polyvinyl Chloride Unspecified, PVC, Unspecified, PVC Unspecified, Polyvinyl Chloride, PVC, Crosspolimeri, PolyvinylChlorideUnspecified, PVCUnspecified, PolyvinylChloride, 100K
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.