IDES Prospector Already have an account? Login Here

IDES

PEARLTHANE® 11H94

Thermoplastic Polyurethane Elastomer (Polycaprolactone)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLTHANE® 11H94 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLTHANE® 11H94 is a high performance polycaprolactone copolyester based TPU, supplied in form of translucent, colorless pellets, featuring adequate hardness as well as excellent flow and mechanical properties, including an outstandingly low compression set value. Product recommended for injection molding applications with an extremely short cycle time.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Fast Molding Cycle
  • High Flow
  • High Hardness
  • Low Compression Set
  
Uses 
  • Seals
Agency Ratings 
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 DIN 53479
Moisture Content 2
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Abrasion Loss
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412, DIN 53504
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength
      
Yield
psi
 ASTM D412
Yield
psi
 DIN 53504
Tensile Elongation (Break)
%
 ASTM D412, DIN 53504
Tear Strength
      
-- 3
lbf/in
 ASTM D624
--
lbf/in
 DIN 53515
Compression Set
     ASTM D395B
158°F, 24.0 hr
%
  
158°F, 70.0 hr
%
  
212°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DIN 51007
Melting Temperature 4
°F
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® 11H94, PEARLTHANE 11H94, PEARLTHANE® , PEARLTHANE, PEARLTHANE11H94, 11 H 94, 11H94, 11H, H94, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polycaprolactone), Thermoplastic Polyurethane Elastomer Polycaprolactone, TPU-Capro, TPUCapro, TPU:Capro, TPU/Capro, TPU+Capro, TPU_Capro, TPU Capro, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolycaprolactone, ThermoplasticPolyurethane, H11
Features
Features may also be described by the following terms: Low Compression Set, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Hardness, Hard, High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Screw Speed
rpm
  
Screw L/D Ratio
 
  
Injection Notes
Closing Force: 30 tons
Screw Diameter: 1.02 in
Maximum Hydraulic Pressure: 3050 psi
Mold: Plaque 4.7x4.7x0.08 in
Injection Time: 3 sec
Holding Time: 15 sec
Cooling Time: 22 sec
Notes
1Typical properties: these are not to be construed as specifications.
2MQSA 44
3Die C
4Temperature at which MFI = 10 g/10 min @ 21.6 kg, MQSA 111
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.