IDES Prospector Already have an account? Login Here

IDES

Resirene CET® 100

Styrene Methyl Methacrylate Acrylic Copolymer

Supplied by Resirene, S.A. de C.V.

The technical datasheet with complete property values for Resirene CET® 100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • Latin America
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Colorability
  • Good Processability
  • Medium Flow
Uses 
  • Foam
  • Packaging
  • Sheet
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.125 in)
psi
 ASTM D638
Tensile Strength (Break, 0.125 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.125 in)
%
 ASTM D638
Flexural Modulus (0.125 in)
psi
 ASTM D790
Flexural Strength (0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Gardner Impact (0.125 in)
in·lb
 ASTM D3029
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0600 in)
 
 UL 94
Optical
Nominal Value
Unit
Test Method
Transmittance (125 mil)
%
 ASTM D1003
Haze (125 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Resirene CET® 100, Resirene CET 100, Resirene CET® , Resirene CET, ResireneCET100, ResireneCET, 100, Acrylic, Acrylic, Styrene Methyl Methacrylate Copolymer, Acrylic Styrene Methyl Methacrylate Copolymer, Acrylic (SMMA), Acrylic SMMA, Resirene, AcrylicStyreneMethylMethacrylateCopolymer, AcrylicSMMA
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI, Good Processability, Easy Processing, Good Colorability.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.