Clearflex H T LFH 208 Polimeri Europa Polyethylene, Linear Low Density

Product Description

Clearflex® H&T LFH 208 is an octene copolymer linear low density polyethyelene, with antioxidants and processing aid, suitable for blown film extrusion.

Films obtained from Clearflex® H&T LFH 208 have excellent optical properties (haze and gloss), wide sealing temperature window, together with optimal sealing resistance, outstanding tear, impact and puncture resistance. Its properties make Clearflex® H&T LFH 208 the right choice for top end performance applications.

Due to its excellent sealing behaviour, Clearflex® H&T LFH 208 is recommended for packaging of food and edible fats and for applications requiring a superior sealing performance. Its very low gel content makes it ideal for lamination. Clearflex® H&T LFH 208 is also recommended for silage stretch film production, due to its outstanding mechanical properties.

General

Material Status

Commercial: Active

Availability

Europe

North America

Additive

Antioxidant

Features

Antioxidant

Broad Seal Range

Copolymer

Food Contact Acceptable

Good Heat Seal

Good Tear Strength

High Gloss

High Impact Resistance

Low Gel

Octene Comonomer

Opticals

Puncture Resistant

Uses

Film

Food Packaging

Laminates

Stretch Wrap

Agency Ratings

Forms

Pellets

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)			ISO 8295
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Film Thickness - Recommended / Available
Tensile Modulus			ISO 527-3
1% Secant, MD: 0.98 mil, Blown Film		psi
1% Secant, TD: 0.98 mil, Blown Film		psi
Tensile Stress			ISO 527-3
MD: Yield, 0.98 mil, Blown Film		psi
TD: Yield, 0.98 mil, Blown Film		psi
MD: Break, 0.98 mil, Blown Film		psi
TD: Break, 0.98 mil, Blown Film		psi
Tensile Elongation			ISO 527-3
MD: Break, 0.98 mil, Blown Film		%
TD: Break, 0.98 mil, Blown Film		%
Dart Drop Impact² (0.98 mil, Blown Film)		g	ISO 7765-1
Elmendorf Tear Strength³			ISO 6383-2
MD: 1.0 mil		lbf/in
TD: 1.0 mil		lbf/in
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature		°F	Internal Method
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 0.984 mil, Blown Film)			ASTM D2457
Haze (0.984 mil, Blown Film)		%	ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Clearflex® H&T LFH 208, Clearflex HT LFH 208, Clearflex® H&T , Clearflex HT, ClearflexHTLFH208, ClearflexHT, H TLFH 208, H T, H&TLFH 208, HTLFH 208, HTLFH, TLFH208, H&T, HT, HTLFH208, LFH 208, LFH208, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 208LFH, TLFHH, TH
Features
Features may also be described by the following terms: Low Gel, High Gloss, Good Heat Seal, High Impact Resistance, Good Puncture Resistance, Puncture Resistant, Good Tear Strength, Octene Comonomer, Broad Seal Range.
Uses
Uses may also be described by the following terms: Food Packaging, Stretch Wrap.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²F50

³Blown Film

Clearflex® H&T LFH 208

Linear Low Density Polyethylene

Supplied by Polimeri Europa