IDES Prospector Already have an account? Login Here

IDES

Sanren F320

Polypropylene Homopolymer

Supplied by SINOPEC Shanghai Petrochemical Co. Ltd.

The technical datasheet with complete property values for Sanren F320 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Chemical Resistance
  • Good Crack Resistance
  • Heat Stabilized
  • Homopolymer
  
Uses 
  • Bi-axially Oriented Film
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Yellowness Index
YI
 ASTM D1925
Additional Information
Cleanliness, GB 12670: <=11-20 piece/kg
Isotacticity, MA 15763: >=94.5%
ASH, MA 15681: <=0.04%
Fish Eye, MA 17108, 0.8mm: <=3.1-5 Piece/1520cm³
Fish Eye, MA 17108, 0.4mm: <=21-30 Piece/1520cm³
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sanren F320, Sanren , SanrenF320, F 320, F320, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Sinopec Shanghai, PolypropyleneHomopolymer, PPHomopolymer, 320F
Features
Features may also be described by the following terms: Good Crack Resistance, Crack Resistant, Good Chemical Resistance, Chemical Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.