Abstron HR-105 Bhansali Eng Poly Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Features

Forms

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow		in/in	ASTM D955
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Yield, 0.126 in)		psi	ASTM D638
Flexural Modulus (0.252 in)		psi	ASTM D790
Flexural Strength (Yield, 0.252 in)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
0.126 in		ft·lb/in
0.252 in		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Annealed)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525³
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.126 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Abstron HR-105, Abstron HR105, Abstron , AbstronHR105, HR, HR-105, HR105, HR:105, HR/105, HR+105, HR_105, HR 105, Acrylonitrile Butadiene Styrene, ABS, Bhansali Eng Poly, AcrylonitrileButadieneStyrene, 105HR
Features
Features may also be described by the following terms: High Heat Resistance, Good Flow.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Drying Time (Tray Oven): 3 to 3.5 hr Drying Time (Hopper Dryers): 2.5 to 3 hr Drying Time (Dry Air Ovens): 2 to 2.5 hr Injection Pressure: Medium to High Back Pressure: Medium to High

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I, 0.20 in/min

³Rate B (120°C/h)

Abstron HR-105