IDES Prospector Already have an account? Login Here

IDES

Abstron IMGS 20

Styrene Acrylonitrile

Glass Fiber Reinforcement, 20%

Supplied by Bhansali Engineering Polymers Limited

The technical datasheet with complete property values for Abstron IMGS 20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • High Heat Resistance
  • High Rigidity
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Flexural Modulus 3 (0.252 in, Injection Molded)
psi
 ASTM D790
Flexural Strength 3 (0.252 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
73°F, 0.126 in, Injection Molded
ft·lb/in
  
73°F, 0.252 in, Injection Molded
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load 4 (264 psi, Annealed, 0.252 in, Injection Molded)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Abstron IMGS 20, Abstron , AbstronIMGS20, IMGS 20, IMGS20, Styrene Acrylonitrile, SAN, Bhansali Eng Poly, StyreneAcrylonitrile, 20IMGS
Features
Features may also be described by the following terms: High Rigidity, High Heat Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
30.20 in/min
4Annealed at 100°C for 2 hr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.