IDES Prospector Already have an account? Login Here

IDES

Multiuse Leostomer® LE-3190N

Thermoplastic Polyurethane Elastomer

Supplied by Riken Technos Corp.

The technical datasheet with complete property values for Multiuse Leostomer® LE-3190N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Good Weather Resistance
  • Recyclable Material
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
 ISO 37
Tensile Stress (Yield)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Tear Strength
lbf/in
 ISO 34-1
Compression Set
     ISO 815
--
%
  
158°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A, 15 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ISO 974
Aging
Nominal Value
Unit
Test Method
Change in Tensile Stress (122°F, 24 hr, in IRM 902 Oil)
%
 ISO 1817
Change in Tensile Strain at Break (122°F, 24 hr, in IRM 902 Oil)
%
 ISO 1817
Additional Information
The values listed above are tested in accordance with JIS K test methods.
Rebound Resilience: 38%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Multiuse Leostomer® LE-3190N, Multiuse Leostomer LE3190N, Multiuse Leostomer® , Multiuse Leostomer, MultiuseLeostomerLE3190N, MultiuseLeostomer, LE, LE 3190 N, LE-3190N, LE3190N, LE:3190N, LE/3190N, LE+3190N, LE_3190N, LE 3190N, LE3190, 3190N, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Riken Technos, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 3190LE
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Screw L/D Ratio: 20.0:1.0
Screw Speed: 10 to 40 rpm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.