PALRAN R S 10 pal plast Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1A/1
Tensile Stress (Yield, 73°F)		psi	ISO 527-2/1A/50
Tensile Strain (Yield, 73°F)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/B50
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1850 to 2000 MPa Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 40 to 45 MPa Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 2 to 4 % Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 12 to 16 kJ/m² Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 98 to 101 °C Density, ISO 1183: 1.04 to 1.06 g/cm³ Water Absorption, ISO 62, 23°C, Saturation: 0.2 to 0.3 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALRAN® R S 10, PALRAN R S 10, PALRAN® , PALRAN, PALRANRS10, R S 10, RS, S10, RS10, Acrylonitrile Butadiene Styrene, ABS, pal plast, AcrylonitrileButadieneStyrene, SR
Features
Features may also be described by the following terms: Good Impact Resistance, Medium Heat Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

PALRAN® R S 10