PALSAFE® R 37

Melt-Volume Flow Rate, ISO 1133, 300°C/1.2 kg: 34 to 40 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2100 to 2300 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 59 to 63 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 5 to 6 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: >50 %
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 141 to 144 °C
Density, ISO 1183: 1.18 to 1.2 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.25 to 0.35 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALSAFE® R 37, PALSAFE R 37, PALSAFE® , PALSAFE, PALSAFER37, R 37, R37, Polycarbonate, PC, pal plast, 37R

Features may also be described by the following terms: High Strength, High Hardness, Hard, Good Impact Resistance, Good Flow.

Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.