PALBLEND® R 85

Melt-Volume Flow Rate, ISO 1133, 260°C/5 kg: 20 to 30 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2100 to 2300 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 50 to 55 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 4 to 6 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: >50 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 35 to 40 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 126 to 129 °C
Density, ISO 1183: 1.13 to 1.15 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.5 to 0.7 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALBLEND® R 85, PALBLEND R 85, PALBLEND® , PALBLEND, PALBLENDR85, R 85, R85, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, pal plast, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 85R

Features may also be described by the following terms: High Impact Resistance, Good Dimensional Stability, Dimensionally Stable.

Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.