PALMID® R 6 E

Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2800 to 3000 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 85 to 90 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 3 to 5 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: >50 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 6 to 9 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 200 to 204 °C
Density, ISO 1183: 1.12 to 1.14 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 8 to 9 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 2.8 to 3 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALMID® R 6 E, PALMID R 6 E, PALMID® , PALMID, PALMIDR6E, R 6 E, R6, 6E, R6E, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, pal plast, Polyamide6, Nylon6, 6R

Generic Name may also be described by the following terms: PA6.

Features may also be described by the following terms: High Impact Resistance, Good Chemical Resistance, Chemical Resistant.

Uses may also be described by the following terms: Tubing, Tube.