|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 9000 to 9500 MPa
Tensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 170 to 180 MPa
Tensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 3 to 4 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 80 to 90 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 12 to 15 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 215 to 220 °C
Density, ISO 1183: 1.35 to 1.37 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 6.2 to 6.5 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 1.9 to 2.1 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALMID® R 6 S GF 30, PALMID R 6 S GF 30, PALMID® , PALMID, PALMIDR6SGF30, R 6 S GF 30, R6, 6S, SGF, GF30, R6SGF30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, pal plast, Polyamide6, Nylon6, 6R
|
|
Features may also be described by the following terms: High Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant.
|