PALMID® R 66 S

Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 3000 to 3200 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 80 to 85 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 3 to 5 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 20 to 30 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 4 to 7 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 247 to 250 °C
Density, ISO 1183: 1.12 to 1.14 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 8 to 9 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 2.8 to 3 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALMID® R 66 S, PALMID R 66 S, PALMID® , PALMID, PALMIDR66S, R 66 S, R66, 66S, R66S, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, pal plast, Polyamide66, Nylon66, 66R

Generic Name may also be described by the following terms: PA66.

Features may also be described by the following terms: High Impact Resistance, Good Flow, Good Chemical Resistance, Chemical Resistant.

Uses may also be described by the following terms: Engineering Parts.