|
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 650 to 750 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 30 to 35 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 15 to 20 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: >50 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 30 to 40 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 126 to 130 °C
Density, ISO 1183: 1 to 1.02 g/cm³
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.4 to 0.6 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALMID® R 12 E, PALMID R 12 E, PALMID® , PALMID, PALMIDR12E, R 12 E, R12, 12E, R12E, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, pal plast, Polyamide12, Nylon12, 12R
|
|
Features may also be described by the following terms: Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Viscosity.
|