|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Volume-Flow Rate (MVR) (200°C/5.0 kg)
|
|
in³/10min
|
ISO 1133 |
|
Tensile Modulus (73°F)
|
|
psi
|
ISO 527-2/1A/1 |
|
Tensile Stress (Yield, 73°F)
|
|
psi
|
ISO 527-2/1A/50 |
|
Tensile Strain (Yield, 73°F)
|
|
%
|
ISO 527-2/1A/50 |
|
Nominal Tensile Strain at Break (73°F)
|
|
%
|
ISO 527-2/1A/50 |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/B50 |
|
Comparative Tracking Index (Solution A)
|
|
V
|
IEC 60112 |
|
Flame Rating - UL (0.0630 in)
|
|
|
UL 94 |
|
Melt-Volume Flow Rate, ISO 1133, 200°C/5 kg: 4 to 8 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1900 to 2100 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 28 to 31 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 1 to 2 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 25 to 30 %
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 80 to 85 °C
Density, ISO 1183: 1.04 to 1.06 g/cm³
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALSTYROL® R S M 12, PALSTYROL R S M 12, PALSTYROL® , PALSTYROL, PALSTYROLRSM12, R S M 12, RS, SM, M12, RSM12, PS, Polystyrene, General Purpose, Polystyrene General Purpose, PS (GPPS), PS GPPS, Polystyrene, pal plast, PolystyreneGeneralPurpose, PSGPPS, SR
|
|
Features may also be described by the following terms: Medium Impact Resistance.
|
|
Uses may also be described by the following terms: Household Goods, Housewares, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
|