|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Melt-Volume Flow Rate, ISO 1133, 190°C/2.16 kg: 12 to 15 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 3000 to 3200 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 68 to 72 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 12 to 15 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 25 to 30 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 7 to 9 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 157 to 160 °C
Density, ISO 1183: 1.4 to 1.42 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.7 to 0.9 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALFORM® R H 50, PALFORM R H 50, PALFORM® , PALFORM, PALFORMRH50, R H 50, RH, H50, RH50, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, pal plast, AcetalPOMHomopolymer, HR
|
|
Features may also be described by the following terms: Medium Viscosity, High Strength, High Impact Resistance, Good Chemical Resistance, Chemical Resistant.
|