|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Melt-Volume Flow Rate, ISO 1133, 190°C/2.16 kg: 8 to 11 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2600 to 2800 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 60 to 65 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 6 to 9 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 26 to 30 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 150 to 180 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 4 to 6 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 148 to 181 °C
Density, ISO 1183: 1.4 to 1.42 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.7 to 0.9 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALFORM® R C 09, PALFORM R C 09, PALFORM® , PALFORM, PALFORMRC09, R C 09, RC, C09, RC09, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, pal plast, AcetalPOMCopolymer, CR
|