|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Melt-Volume Flow Rate, ISO 1133, 190°C/2.16 kg: 11 to 14 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2700 to 2900 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 60 to 65 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 6 to 9 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 20 to 25 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 120 to 150 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 4.5 to 6.5 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 148 to 151 °C
Density, ISO 1183: 1.4 to 1.42 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.7 to 0.9 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALFORM® R C 13, PALFORM R C 13, PALFORM® , PALFORM, PALFORMRC13, R C 13, RC, C13, RC13, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, pal plast, AcetalPOMCopolymer, CR
|