PALGLAS R 07 pal plast Acrylic, Polymethyl Methacrylate

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Flow

Medium Heat Resistance

Uses

Appliances

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1A/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/1A/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2900 to 3100 MPa Tensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 68 to 72 MPa Tensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 2 to 5 % Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 15 to 20 kJ/m² Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 100 to 103 °C Density, ISO 1183: 1.18 to 1.2 g/cm³ Water Absorption, ISO 62, 23°C, Saturation: 1.9 to 2.1 % Moisture Absorption, ISO 62, 23°C, 50% RH: 0.5 to 0.7 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALGLAS® R 07, PALGLAS R 07, PALGLAS® , PALGLAS, PALGLASR07, R 07, R07, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, pal plast, AcrylicPolymethylMethacrylate, AcrylicPMMA, 07R
Features
Features may also be described by the following terms: Medium Heat Resistance, Good Flow.

Notes

¹Typical properties: these are not to be construed as specifications.

PALGLAS® R 07

Polymethyl Methacrylate Acrylic

Supplied by pal plast GmbH