IDES Prospector Already have an account? Login Here

IDES

PALPROP® R C 25

Polypropylene Impact Copolymer

Supplied by pal plast GmbH

The technical datasheet with complete property values for PALPROP® R C 25 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Block Copolymer
  • Good Flow
  • High Impact Resistance
  • High Stiffness
  • Low Temperature Impact Resistance
Uses 
  • Automotive Applications
  • Luggage
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1A/1
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/1A/50
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1200 to 1400 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 25 to 28 MPa
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 15 to 20 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 7 to 10 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 66 to 70 °C
Density, ISO 1183: 0.9 to 0.92 g/cm³
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALPROP® R C 25, PALPROP R C 25, PALPROP® , PALPROP, PALPROPRC25, R C 25, RC, C25, RC25, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, pal plast, PolypropyleneImpactCopolymer, PPImpactCopolymer, CR
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Stiffness, High Impact Resistance, Good Flow, Block Copolymer.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.