PALPROP® R C 15 TV 20

Melt-Volume Flow Rate, ISO 1133, 230°C/2.16 kg: 7 to 15 cm³/10 min
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2000 to 2500 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 28 to 32 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 5 to 8 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: 15 to 20 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 40 to 50 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 2 to 4 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 90 to 95 °C
Density, ISO 1183: 1.04 to 1.06 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 1.8 to 2 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALPROP® R C 15 TV 20, PALPROP R C 15 TV 20, PALPROP® , PALPROP, PALPROPRC15TV20, R C 15 TV 20, RC, C15, 15TV, TV20, RC15TV20, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, pal plast, PolypropyleneCopolymer, PPCopolymer, CR

Features may also be described by the following terms: Low Warpage, Low Warp, Good Surface Finish, Good Stiffness, Good Impact Resistance.

Uses may also be described by the following terms: Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.