PALPROP R M 763 pal plast Polypropylene, Unspecified (Mineral Filler)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1A/1
Tensile Stress (Yield, 73°F)		psi	ISO 527-2/1A/50
Tensile Strain (Break, 73°F)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Additional Information
Melt-Volume Flow Rate, ISO 1133, 230°C/2.16 kg: 6 to 10 cm³/10 min Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1150 to 1250 MPa Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 12 to 16 MPa Tensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: >100 % HDT 0.45 MPa, ISO 75: 85 to 88 °C Density, ISO 1183: 0.96 to 0.98 g/cm³
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALPROP® R M 763, PALPROP R M 763, PALPROP® , PALPROP, PALPROPRM763, R M 763, RM, M763, RM763, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, pal plast, PolypropyleneUnspecified, PPUnspecified, MR
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.

Notes

¹Typical properties: these are not to be construed as specifications.

PALPROP® R M 763