|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 2300 to 2600 MPa
Tensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 50 to 55 MPa
Tensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 3 to 5 %
Nominal Tensile Strain at Break, ISO 527, 23°C, 50 mm/min, Type A: >50 %
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 3 to 4 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 177 to 180 °C
Density, ISO 1183: 1.29 to 1.31 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.4 to 0.5 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALDUR® R 20, PALDUR R 20, PALDUR® , PALDUR, PALDURR20, R 20, R20, Polybutylene Terephthalate, PBT, Polyester, pal plast, PolybutyleneTerephthalate, 20R
|
|
Features may also be described by the following terms: High Viscosity, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Chemical Resistance, Chemical Resistant.
|
|
Uses may also be described by the following terms: Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
|