PALDUR® R 15 GF 10

Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 4200 to 4800 MPa
Tensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 80 to 90 MPa
Tensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 3 to 4 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 20 to 30 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 5 to 6 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 207 to 210 °C
Density, ISO 1183: 1.36 to 1.38 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.4 to 0.5 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %

Product names can be difficult to match. You may have searched any one of these terms to find this product: PALDUR® R 15 GF 10, PALDUR R 15 GF 10, PALDUR® , PALDUR, PALDURR15GF10, R 15 GF 10, R15, 15GF, GF10, R15GF10, Polybutylene Terephthalate, PBT, Polyester, pal plast, PolybutyleneTerephthalate, 15R

Features may also be described by the following terms: Good Processability, Easy Processing, High Strength, Good Chemical Resistance, Chemical Resistant.

Uses may also be described by the following terms: Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.