|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
|
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 6700 to 7500 MPa
Tensile Stress at Break, ISO 527, 23°C, 5 mm/min, Type A: 110 to 120 MPa
Tensile Strain at Break, ISO 527, 23°C, 5 mm/min, Type A: 3 to 4 %
Charpy Unnotched Impact, ISO 179, Type 1, Edgewise, 23°C: 40 to 50 kJ/m²
Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 7 to 9 kJ/m²
Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 212 to 215 °C
Density, ISO 1183: 1.44 to 1.46 g/cm³
Water Absorption, ISO 62, 23°C, Saturation: 0.35 to 0.4 %
Moisture Absorption, ISO 62, 23°C, 50% RH: 0.15 to 0.2 %
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: PALDUR® R 15 GF 20, PALDUR R 15 GF 20, PALDUR® , PALDUR, PALDURR15GF20, R 15 GF 20, R15, 15GF, GF20, R15GF20, Polybutylene Terephthalate, PBT, Polyester, pal plast, PolybutyleneTerephthalate, 15R
|
|
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, High Strength, High Stiffness, Good Chemical Resistance, Chemical Resistant.
|
|
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
|