HANWHA LDPE 5321UV Hanwha Polyethylene, Low Density

Product Description

HANWHA LDPE 5321UV is manufactured by DOW tubular high pressure process and designed for variety of film application such as mulching film(blend with LLDPE). LDPE 5321UV has well balanced property of light stability, mechanical property and processability.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

Additive

Antiblock

Antioxidant

Slip

UV Stabilizer

Features

Antiblocking

Antioxidant

Good Processability

Good UV Resistance

Slip

Uses

Film

Agency Ratings

Forms

Pellets

Processing Method

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Break, 1.2 mil		psi
TD: Break, 1.2 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 1.2 mil		%
TD: Break, 1.2 mil		%
Dart Drop Impact (1.2 mil)		g	ASTM D1709
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Melting Temperature		°F
Optical	Nominal Value	Unit	Test Method
Haze (1.18 mil)		%	ASTM D1003
Additional Information	Nominal Value	Unit	Test Method
Tensile Tear Strength			ASTM D1004
MD: 1.2 mil		lbf/in
TD: 1.2 mil		lbf/in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA LDPE 5321UV, HANWHA LDPE , HANWHALDPE5321UV, HANWHALDPE, LDPE 5321 UV, LDPE5321UV, LDPE5321, LDPE, 5321 UV, 5321UV, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Hanwha, PolyethyleneLowDensity, UV5321, 5321LDPE
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Slip, Unspecified Slip, Good Processability, Easy Processing, Antiblocking, Unspecified Antiblock.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F
Extrusion Notes
Blow-up Ratio: 2 to 3 Optimum Gage Range: 0.025 to 0.1 mm

Notes

¹Typical properties: these are not to be construed as specifications.

HANWHA LDPE 5321UV

Low Density Polyethylene

Supplied by Hanwha Chemical