IDES Prospector Already have an account? Login Here

IDES

HANWHA EVA 2060

Ethylene Vinyl Acetate Copolymer

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA EVA 2060 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HANWHA EVA 2050 is manufactured by DOW tubular high pressure process and designed for variety of film application such as multiplayer agricultural film. EVA 2060 has well balanced property of high clarity, mechanical property and processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Processability
  • High Clarity
Uses 
  • Agricultural Applications
  • Film
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 2.4 mil
psi
  
TD: Break, 2.4 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.4 mil
%
  
TD: Break, 2.4 mil
%
  
Dart Drop Impact (2.4 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
  
Optical
Nominal Value
Unit
Test Method
Haze (2.36 mil)
%
 ASTM D1003
Additional Information
Tensile Tear Strength, ASTM D1004, 0.06 mm, MD: 370 kg/cm
Tensile Tear Strength, ASTM D1004, 0.06 mm, TD: 680 kg/cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA EVA 2060, HANWHA EVA , HANWHAEVA2060, HANWHAEVA, EVA 2060, EVA2060, EVA, 2060, Ethylene Vinyl Acetate Copolymer, Polyethylene, PE, Hanwha, EthyleneVinylAcetateCopolymer, 2060EVA
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Clarity.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Blow-up Ratio: 2 to 3
Optimum Gage Range: 0.05 to 0.1 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.