IDES Prospector Already have an account? Login Here

IDES

HANWHA EVA 1534

Ethylene Vinyl Acetate Copolymer

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA EVA 1534 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HANWHA EVA 1534 is manufactured by autoclave high pressure process and designed for hot melt adhesives. EVA 1534 is well known for its excellent adhesive strength and high quality assurance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Adhesion
  • Good Processability
Uses 
  • Adhesives
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
  
Additional Information
Do not exceed 200°C in processing.
Purge the equipment after use.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA EVA 1534, HANWHA EVA , HANWHAEVA1534, HANWHAEVA, EVA 1534, EVA1534, EVA, 1534, Ethylene Vinyl Acetate Copolymer, Polyethylene, PE, Hanwha, EthyleneVinylAcetateCopolymer, 1534EVA
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Adhesion.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.