IDES Prospector Already have an account? Login Here

IDES

HANWHA LLDPE HS1700

Linear Low Density Polyethylene

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA LLDPE HS1700 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HANWHA LLDPE HS1700 is high strength LLDPE manufactured by Unipol process and designed for stretch wrap and diaper film application. LLDPE HS1600 has excellent mechanical property, stretchability, optical properties and water vapor transmittance rate.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • High Strength
  • Opticals
Uses 
  • Film
  • Stretch Wrap
  
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 0.79 mil
psi
  
TD: Break, 0.79 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.79 mil
%
  
TD: Break, 0.79 mil
%
  
Dart Drop Impact (0.79 mil)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 ASTM D3418
Optical
Nominal Value
Unit
Test Method
Haze (0.787 mil)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Tensile Tear Strength
     ASTM D1004
MD: 0.8 mil
lbf/in
  
TD: 0.8 mil
lbf/in
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA LLDPE HS1700, HANWHA LLDPE , HANWHALLDPEHS1700, HANWHALLDPE, LLDPEHS 1700, LLDPEHS1700, LLDPE, HS 1700, HS1700, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Hanwha, PolyethyleneLinearLowDensity, 1700HS, 1700LLDPEHS
Features
Features may also be described by the following terms: High Strength.
Uses
Uses may also be described by the following terms: Stretch Wrap.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Optimum Gage Range: 0.015 to 0.05 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.