IDES Prospector Already have an account? Login Here

IDES

HANWHA CLNA-8144SC

Low Density Polyethylene

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA CLNA-8144SC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HANWHA Wire & Cable Compound CLNA-8141SC is a low density, crosslinkable polyethylene compound designed for high voltage(154kV and higher) power cable insulation requiring a high degree of cleanness. It has a extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Antioxidant
  • Crosslinkable
  • Good Electrical Properties
  • Good Thermal Stability
  • Medium Heat Resistance
Uses 
  • High Voltage Insulation
  • Wire & Cable Applications
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Environmental Stress-Cracking Resistance (10% Igepal)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (277°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air (277°F, 168 hr)
%
 ASTM D573
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (1 MHz)
 
 ASTM D150
Dissipation Factor (1 MHz)
 
 ASTM D150
Additional Information
Degree of Crosslinking, ASTM D2765A: 80%
Weather Resistance, ASTM G26 Method 1, 2000 hr, Weather-o-meter, Tensile Strength Retention: >90%
Weather Resistance, ASTM G26 Method 1, 2000 hr, Weather-o-meter, Elongation Retention: >90%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA CLNA-8144SC, HANWHA CLNA8144SC, HANWHA , HANWHACLNA8144SC, CLNA, CLNA 8144 SC, CLNA-8144SC, CLNA8144SC, CLNA:8144SC, CLNA/8144SC, CLNA+8144SC, CLNA_8144SC, CLNA 8144SC, CLNA8144, 8144SC, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PolyethyleneLowDensity, 8144CLNA
Features
Features may also be described by the following terms: Good Thermal Stability, Medium Heat Resistance, Good Electrical Properties.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications, High Voltage Insulation.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Cure Temperature: 320 to 390°C
Line Speed: 2 to 3 m/min
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.