IDES Prospector Already have an account? Login Here

IDES

Unithene LH506

High Density Polyethylene

Supplied by USI Corporation

The technical datasheet with complete property values for Unithene LH506 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
UNITHENE LH506 is a high density polyethylene developed for injection molding and filament applications like UNITHENE LH606. Possessing outstanding impact strength and improved resistance to environmental stress, UNITHENE LH506 is specially suitable for molding sport utensils and industrial cases, while UNITHENE LH606 is suitable for pallets, fruit crates, and washing basins. UNITHENE LH506 could be easily pigmented to any color by either dry blending or extrusion homogenization of pigment into the resin. UNITHENE LH506 meets the requirement of the U.S. Food and Drug Administration regulation (FDA). It can be safely used for food applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
Uses 
  • Crates
  • Industrial Applications
  • Sporting Goods
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - 1% Secant (Compression Molded)
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield, Injection Molded
psi
  
Break, Injection Molded
psi
  
Tensile Elongation (Break, Injection Molded)
%
 ASTM D638
Apparent Bending Modulus
psi
 ASTM D747
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Melting Point, ASTM D2117: 129°C
Torsional Stiffness, ASTM D1043: 10000 kg/cm²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Unithene LH506, Unithene , UnitheneLH506, LH 506, LH506, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, USI Corporation, PolyethyleneHighDensity, 506LH
Features
Features may also be described by the following terms: High Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.