IDES Prospector Already have an account? Login Here

IDES

Linathene LL110

Linear Low Density Polyethylene

Supplied by USI Corporation

The technical datasheet with complete property values for Linathene LL110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LINATHENE LL110 is a linear low density polyethylene developed for blown-film extrusion. Films extruded from LINATHENE LL110 have outstanding impact strength, puncture strength, tear strength, tensile strength, elongation and optical properties. Besides, it possesses excellent drawability. Above characteristics make this resin ideal for heavy duty bags, liner films, frozen food bags and other industrial and consumer packaging applications. LINATHENE LL110 meets the requirement of the U.S. Food and Drug Administration regulation. It can be safely used for food packaging applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Drawdown
  • Good Tear Strength
  • High Impact Resistance
  • High Tensile Strength
  • Low Density
  • Puncture Resistant
Uses 
  • Bags
  • Consumer Applications
  • Film
  • Food Packaging
  • Industrial Applications
  • Liners
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
 ASTM D523
Haze
%
 ASTM D1003
Additional Information
Melting Point, ASTM D2117: 122°C
Shrink Ratio, ASTM D995: 2%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Linathene LL110, Linathene , LinatheneLL110, LL 110, LL110, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, USI Corporation, PolyethyleneLinearLowDensity, 110LL
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, High Impact Resistance, High Tensile Strength, Good Tear Strength, Good Puncture Resistance, Puncture Resistant, Good Drawdown, Good draw down.
Uses
Uses may also be described by the following terms: Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.